dedusting bag,dust settling pocket/Aramid fiber mat
Basic Info
Model No.: AOBOF12
Product Description
ptfe coated fiberglass Dust Filter Bag
Product Description
Specification:
ptfe coated fiberglass dust Filter bag | ||
| Material | Fiberglass, ptfe coated | |
| Weight(g/m²) of Felt | 800±50g | |
| Thickness(mm)of felt | 2mm | |
| Air-permeability (m³/m²/min) | 15 | |
| Breaking strength (N/5*20cm) | Warp | >1800 |
| Weft | >1842 | |
| Breaking elongation(%) | Warp | <35 |
| Weft | <40 | |
| Continuous working temperature(°C) | ≤240 | |
| Instant working temperature(°C) | 280 | |
| Acid resistance | Excellent | |
| Alkali resistance | Good | |
| Abrasion resistance | Excellent | |
| Finish treatment | Singeing,calendaring, | |
Application:
1, coal-fired boiler bag-type dust remover
2, half dry, dry desulfurization bag-type dust remover
3, biomass power generation bag-type dust remover
4, garbage incineration power generation (fluidized bed boiler)
5, gold smelting the arsenic system
6, smelter matte drying system
7, kaolin dust removal system Suitable for high oxygen, oxidizing acid gas high in working condition.
Packaging & Shipping
Packaging: Inner plastic bag, Outer carbon box.
Shipping: transprot by sea.
FAQ
Bag Erection and Storage Requirements
• Before installing filter bags the tube sheet must be checked to ensure that it is clean, there are no sharp edges and there is no debris that could eventually fall into the filter bags
• The installation procedure is normally decided on site and is dependant upon the number of personnel being used and the available access. Normally it is wise to work compartment by compartment first fitting all the filter bags.
• The filter bags fitting is simple via a snap band, no tools are required. The filter bag is lowered into the corresponding tube sheet hole and the top seal is made by forming a kidney shape in the snap band top and then releasing this into the tube sheet hole. The groove in the filter bag should fit tightly into the tube sheet forming a seal.
• This is repeated until all the filter bags have been fitted.
• Before lowering the cages into the filter bags boards or heavy cardboard should be placed over the bags to protect the filter bags and prevent them being stepped on. If the bags are stepped on they can loose the seal and cause dust emissions at a later date.
• During the installation of the cages care should be taken not to damage or bend the cages. No damaged, badly bent or corroded cages should be fitted into the filter bags.
• After all cages have been fitted, an inspection from the inside of the hoppers must be carried out to ensure that all the bags and cages are the correct dimensions and positions.
• Before installing filter bags the tube sheet must be checked to ensure that it is clean, there are no sharp edges and there is no debris that could eventually fall into the filter bags
• The installation procedure is normally decided on site and is dependant upon the number of personnel being used and the available access. Normally it is wise to work compartment by compartment first fitting all the filter bags.
• The filter bags fitting is simple via a snap band, no tools are required. The filter bag is lowered into the corresponding tube sheet hole and the top seal is made by forming a kidney shape in the snap band top and then releasing this into the tube sheet hole. The groove in the filter bag should fit tightly into the tube sheet forming a seal.
• This is repeated until all the filter bags have been fitted.
• Before lowering the cages into the filter bags boards or heavy cardboard should be placed over the bags to protect the filter bags and prevent them being stepped on. If the bags are stepped on they can loose the seal and cause dust emissions at a later date.
• During the installation of the cages care should be taken not to damage or bend the cages. No damaged, badly bent or corroded cages should be fitted into the filter bags.
• After all cages have been fitted, an inspection from the inside of the hoppers must be carried out to ensure that all the bags and cages are the correct dimensions and positions.
Important rules for storing filter bags.
• Store the filter bags and support cages in their original packaging.
• The filter bags and support cages must be stored in a dry area.
• Keep the filter bags away from all types of fungi, micro-organisms and insects.
• Protect the filter bags from rodents or other pests.
• Avoid loading the filter bags and support cages with other heavy objects.
• The filter bags and support cages must be stored in a dry area.
• Keep the filter bags away from all types of fungi, micro-organisms and insects.
• Protect the filter bags from rodents or other pests.
• Avoid loading the filter bags and support cages with other heavy objects.
Company Information
Product Categories : Dust collector > Dust Filter Bag
Premium Related Products
Other Products
Hot Products
supply fire resistant cotton, fire-retardant insulation cotton,Eco-friendly fire resistant cottonHigh quality 100% wool needle felt wool paddingthermal boned cotton polyester lightweight baby quilt fillingHigh quality camel hair wadding for filling materialTop grade washed merino wool batting /wadding for mattress/home textilesFar-infrared waddingEco-friendly bamboo fiber wadding/felt can be provide SGS certificateFlame retardant polyester wadding with CA 117 certificateNon-woven Flax fiber Felt/non-woven Flax fiber waddingCustomized organic 100% cotton wadding batting with organic certificateFactory director supply 100%cotton wadding 220gsm cotton batting for baby beddingFlame retardant felt with certification for mattressFlame Resistant barriers WADDING for mattressCustomized Gram Flame Retardant Thermal Bonded Polyester WaddingAOBO 20% Bamboo and 80%silk Fiber needle-punched cotton paddingcamel hair wadding for garment filling